Avaliação da alteração de cor de uma resina composta "beautiful bulk" submetida à imersão em soluções pigmentantes / Color change evaluation of a composite resin "beautiful bulk" submitted to immersion in pigmentant solutions

Objetivo:O objetivo do estudo foi verificar, in vitro, a alteração de cor da resina composta Beautiful-Bulk®, exposta aos líquidos pigmentantes. Métodos:Foram confeccionados 60 espécimes da resina (15,0 mm de diâmetro e 1,0 mm de espessura, n = 5) nas cores A2, B2 e C2. Os espécimes foram mantidos em uma sala escura por sete dias, em ambiente seco, a 37 °C e, em seguida, foram fotografados com aparelho celular iPhone 6S®. Os espécimes foram divididos aleatoriamente e submetidos a ciclos de imersão em quatro líquidos: água destilada (controle), suco de açaí, Coca-Cola® e molho de tomate. As imersões foram realizadas em sete e quatorze dias de forma cíclica, após a confecção dos espécimes, três vezes ao dia, durante 20 minutos. Ao fim de cada ciclo, novas fotografias foram realizadas. As imagens foram analisadas no programa Adobe Photoshop® e os dados convertidos em L*a*b através de um histograma. A variação de cor (∆E) foi analisada pela escala CIE-Lab. Resultados:A análise dos resultados (One-way ANOVA, Teste de Tukey, p < 0,05) demonstrou que o grupo controle produziu maior alteração de cor (p < 0,05) em sete e quatorze dias na cor A2. A cor B2, no ciclo de quatorze dias, apresentou maior alteração de cor (p < 0,05) para os espécimes imersos em molho de tomate sem diferença estatística (p > 0,05) do controle. Para a cor C2, os espécimes imersos em molho de tomate tiveram maior alteração de cor (p < 0,05) em sete dias. Conclusão:Conclui-se que todas as substâncias pigmentantes e a água destilada foram capazes de produzir grandes alterações de cor na resina Beautifil Bulk®. Existe uma interação significativa entre a cor da resina e agentes pigmentantes.

Aim: This study sought to verify, in vitro, the color change of the nanoparticle composite resin, Beautiful Bulk®, exposed directly to pigmented liquids. Methods: Sixty test specimens were made in a Metal matrix (15.0 mm X 1.0 mm) using composite resin (n = 5) in colors A2, B2, and C2. The specimens were photographed with a smartphone (iPhone 6S®) seven days after the preparation. The specimens were kept in the dark for seven days, dry, at 37°C. The specimens were then randomly divided and immersed in four liquids: distilled water (control), açaí juice, Coca-Cola®, and tomato sauce. The immersions were performed in seven and fourteen days cyclically, three times a day, for 20 minutes. At the end of each immersion cycle, new photographs were taken with the same smartphone. The images were analyzed in the Adobe Photoshop® program, and the data was converted to L* a* b* through a histogram. The color variation (∆E) was analyzed by the CIE-Lab scale. Results: Analysis of the results (Tukey's test, p < 0.05) showed that the control group produced a greater color change (p < 0.05) in seven and fourteen days in the A2 shade. The B2 shade, in fourteen days, showed a greater color change (p < 0.05) for the specimens immersed in tomato sauce with no statistical difference (p > 0.05) of the control. For the C2 shade, the specimens immersed in tomato sauce presented a greater color change (p < 0.05) at seven days. Conclusion: It could therefore be concluded that there is a significant interaction between the composite resin and pigment agents. All pigmented substances produced color changes in the composite resin.

Quantitative image of fluorescence of ceramic and resin-cement veneers.

The main of the study was quantify the effect of two ceramics with two underlying resin cements on apparent fluorescence levels. Buccal surfaces of two bovine incisors were ground flat producing one enamel and one dentin substrate. The veneers were fabricated (0.5 and 1.0 mm thickness) using two ceramics (IPSe.max Press and IPSe.max Zirpress, Ivoclar Vivadent). Veneers were cemented using either light-cured (Variolink II, Ivoclar Vivadent) or self-adhesive dual (Rely X U200, 3M ESPE) cement. The layered Control group materials had no cement application. Semi-quantitative fluorescence image analysis (Matlabs software, Matworks) involved processing the images as captured under each daylight (DL, Gretagmacbeth) and ultraviolet illuminants (UVA, Sylvania) within a neutral-gray lightbox (Macbeth Spectral Light). Statistical analysis of the quantitative fluorescence values was performed using two-way ANOVA and Tukey's test (p < 0.05). The e.max Zirpress on the dentin substrate produced greater fluorescence (p < 0.05) when subjected to UV illumination and more fluorescence (p < 0.05) than e.max Press in both cement groups. Light-cured cement produced higher (p < 0.05) fluorescence than the dual-cement with e.max Press on enamel under UV illumination. The fluorescence for e.max Press on the dentin substrate was greater (p < 0.05) than for e.max Zirpress using dual self-adhesive cement subjected to daylight illumination. Thus, it is possible to conclude that the combination of ceramic and cement produce definite, significant effects on the apparent fluorescence, vital quality for restorative dentistry.

Effectiveness of over-the-counter tooth-whitening strips and toothbrushing for stain removal / Eficácia da utilização de tiras de clareamento dental e da escovação na remoção de manchas dentais

Objective: The present study compared the effectiveness of over-the-counter tooth-whitening strips and too-thbrushing for stain removal. Materials and method: Forty bovine teeth were subjected to initial color re-adings and divided into two groups: 20 teeth were stained with grape juice for seven days and 20 did not receive any treatment (control). Each group was subdivided into two groups (n=10) according to treatment: whitening strips twice/day (30 minutes/7 days) and mechanical brushing with toothpaste (one year). After the treatments, final color readings were taken and color stability (ΔEab), coordinates (ΔL, Δa, Δb), and whitening index (WID) were calculated and analyzed statistically (two-way ANOVA, Bonferroni α=0.05). Results: Statis-tical differences were found for ΔEab and all coordinates between the Control and Stained groups, with major changes in the Stained groups for both treatments. In the Control group, whitening strips produced greater changes in Δb (p <0.05), indicating decrease of yellowness. For the Stained group, whitening strips produced greater changes in Δa (p <0.05), indicating redness reduction. Conclusion: Both treatments were effective for removing stains, and whitening strips were more efficient and effective for changing the color of teeth without previous staining. (AU)

Objetivo: o presente estudo comparou a eficácia das tiras de clareamento dentário e da escovação na remoção de manchas. Materiais e método: quarenta dentes bovinos foram submetidos à lei-tura inicial de cor e divididos em dois grupos: 20 manchados com suco de uva por 7 dias e 20 não receberam tratamento (controle). Cada grupo foi subdividido em 2 grupos (n=10) de acordo com o tratamento: tiras de clareamento 2 vezes/dia (30 minutos/7 dias) e escovação mecânica com cre-me dental (1 ano). Após os tratamentos, leituras finais de cor foram realizadas. Então, a estabili-dade de cor (ΔEab), as coordenadas (ΔL, Δa, Δb) e o índice de clareamento (WID) foram calculados e analisados estatisticamente (two-way ANOVA, Bonferroni α=0,05). Resultados: diferenças es-tatísticas foram encontradas em ΔEab e todas as coordenadas entre os grupos controle e mancha-dos, com maior alteração no grupo manchado, independente do tratamento. No grupo controle, o clareamento produziu maior alteração em Δb (p <0,05), indicando redução do croma amarelo. Nos dentes manchados, ocorreu maior alteração em Δa nos dentes clareados (p <0,05), indicando diminuição do croma vermelho. Conclusão: am-bos os tratamentos foram eficazes na remoção de manchas e o clareamento dentário mostrou-se um método mais eficiente e efetivo para alteração de cor de dentes que não haviam sido submetidos à pigmentação prévia. (AU)

Quantitative image of fluorescence of ceramic and resin-cement veneers

Abstract The main of the study was quantify the effect of two ceramics with two underlying resin cements on apparent fluorescence levels. Buccal surfaces of two bovine incisors were ground flat producing one enamel and one dentin substrate. The veneers were fabricated (0.5 and 1.0 mm thickness) using two ceramics (IPSe.max Press and IPSe.max Zirpress, Ivoclar Vivadent). Veneers were cemented using either light-cured (Variolink II, Ivoclar Vivadent) or self-adhesive dual (Rely X U200, 3M ESPE) cement. The layered Control group materials had no cement application. Semi-quantitative fluorescence image analysis (Matlabs software, Matworks) involved processing the images as captured under each daylight (DL, Gretagmacbeth) and ultraviolet illuminants (UVA, Sylvania) within a neutral-gray lightbox (Macbeth Spectral Light). Statistical analysis of the quantitative fluorescence values was performed using two-way ANOVA and Tukey's test (p < 0.05). The e.max Zirpress on the dentin substrate produced greater fluorescence (p < 0.05) when subjected to UV illumination and more fluorescence (p < 0.05) than e.max Press in both cement groups. Light-cured cement produced higher (p < 0.05) fluorescence than the dual-cement with e.max Press on enamel under UV illumination. The fluorescence for e.max Press on the dentin substrate was greater (p < 0.05) than for e.max Zirpress using dual self-adhesive cement subjected to daylight illumination. Thus, it is possible to conclude that the combination of ceramic and cement produce definite, significant effects on the apparent fluorescence, vital quality for restorative dentistry.

Overdentures mandibulares sobre implantes imediatos não esplintados, em carga imediata: acompanhamento de 36 meses / Mandibular overdentures on implants immediately implanted, immediate load: 36 month follow-up

Objetivo: Relatar a taxa de sobrevivência de implantes imediatos suportando overdentures mandibulares, em carga imediata, e o índice de sucesso dos tratamentos acompanhados por 36 meses. Métodos: Os implantes foram instalados em um projeto de extensão universitária que se propõe a reabilitar pacientes de baixa renda, com dentição seriamente comprometida. Quarenta e dois pacientes foram selecionados para o estudo. Em três casos, não se alcançou travamento primário compatível com o procedimento de carga imediata sobre implantes. Nesses pacientes, as próteses foram capturadas de forma convencional, após o período de osseointegração. Trinta e nove pacientes receberam o tratamento proposto. Três deles sofreram perda precoce de um dos implantes, todos ainda no primeiro mês após os procedimentos. Os implantes perdidos foram, posteriormente, substituídos e recapturados após três meses. Trinta e seis pacientes completaram o período de osseointegração sem apresentar perdas. Os pacientes passaram, então, a ser avaliados semestralmente, sendo que 25 completaram o estudo. Onze pacientes não compareceram às consultas de reavaliação por motivos variados. Resultados: A taxa de sobrevivência, até o final do período de osseointegração foi de 96,15%, isso é, 3 implantes perdidos em 78 imediatamente carregados. O índice de sucesso dos tratamentos acompanhados por 36 meses foi de 100%, uma vez que não foi observada nenhuma perda adicional de implantes. Conclusão: A reabilitação oral de pacientes que perderam todos os seus dentes mandibulares, por meio de overdentures sobre implantes imediatos não esplintados, em carga imediata, utilizando-se o sistema bola, mostrou-se muito satisfatório, com alta taxa de sobrevivência dos implantes, e alto índice de sucesso dos tratamentos acompanhados por 36 meses. O projeto de extensão tem observado resultados clínicos, tanto estéticos quanto funcionais, altamente satisfatórios, proporcionando uma melhora acentuada na autoestima e na qualidade de vida da população assistida.

Aim:This study aimed to report the survival rate of immediate implants supporting mandibular overdentures, which have been immediately loaded, and the success rate of the treatments followed up for 36 months. Methods: The implants were installed in a university extension project that seeks to rehabilitate low-income patients with seriously compromised dentitions. Forty-two patients were selected for the study. In three cases, the primary stability proved to be incompatible with the immediate loading procedure on implants. Thus, in these cases prostheses were captured conventionally after the period of osseointegration. Thirtynine patients received the proposed treatment. Three of them suffered an early loss of one of the implants, all in the first month after the procedures. The lost implants were replaced and recaptured after three months. Thirty-six patients completed the period of osseointegration without implant loss. The patients were evaluated every six months, and twenty-five patients completed the study. Eleven patients did not take part in the follow-up sessions for various reasons. Results: The survival rate until the end of the period of osseointegration was 96.15%, in other words, within the 78 immediately loaded implants, three were lost. The success rate of treatments followed up for 36 months was 100%, without additional loss of implants. Conclusion: The oral rehabilitation of patients using overdentures on immediate implants with immediate loading, using the ball system, proved to be very satisfactory, with a high survival rate of the implants, and high success rates of treatments followed up for 36 months.

The effect of proanthocyanidins and chlorhexidine on the bond strength of glass fiber posts to root dentin.

In this study, the influence of different irrigant solutions applied before cementation on the bond strength (BS) of glass fiber posts to root dentin was evaluated. Thirty endodontically treated maxillary canines of similar length were selected and divided into 3 groups (n = 10) according to the irrigant solution used before post cementation: 1% sodium hypochlorite (NaOCl; control), 2% chlorhexidine (CHX), or a 6.5% grape seed extract (GSE) cross-linking agent. After cementation of the posts, the roots were transversely sectioned to create 2 discs (2 mm) for each of the root thirds: coronal, middle, and apical. These discs were submitted to push-out tests (0.5 mm/min) to evaluate the BS between the glass fiber posts and the root dentin. Statistical analysis was performed by a 2-way analysis of variance and a Tukey test (P < 0.05). The failure mode was evaluated in all specimens. Both the CHX and GSE groups presented significantly higher BS values than the control group in all root thirds (P < 0.05). The values of the GSE group were significantly higher than those of the CHX group in all thirds except the apical third (P < 0.05). In the control group, the BS value was highest in the cervical third. There was no significant difference in the BS values between the cervical and middle thirds when CHX was used (P > 0.05); however, the BS value diminished significantly in the apical third (P < 0.05). The highest BS value in the GSE group was found in the middle third. The results showed that the use of either GSE or CHX before adhesive cementation improved the BS of glass fiber posts to root dentin.

Influence of Different Types of Resin Luting Agents on Color Stability of Ceramic Laminate Veneers Subjected to Accelerated Artificial Aging.

The aim of this study was to evaluate the influence of accelerated aging (AAA) on the color stability of resin cements for bonding ceramic laminate veneers of different thicknesses. The occlusal surfaces of 80 healthy human molars were flattened. Ceramic laminate veneers (IPS e-max Ceram) of two thicknesses (0.5 and 1.0 mm) were bonded with three types of luting agents: light-cured, conventional dual and self-adhesive dual cement. Teeth without restorations and cement samples (0.5 mm) were used as control. After initial color evaluations, the samples were subjected to AAA for 580 h. After this, new color readouts were made, and the color stability (ΔE) and luminosity (ΔL) data were analyzed. The greatest color changes (p<0.05) occurred when 0.5 mm veneers were fixed with light-cured cement and the lowest when 1.0 mm veneers were fixed with conventional dual cement. There was no influence of the restoration thickness when the self-adhesive dual cement was used. When veneers were compared with the control groups, it was verified that the cement samples presented the greatest alterations (p<0.05) in comparison with both substrates and restored teeth. Therefore, it was concluded that the thickness of the restoration influences color and luminosity changes for conventional dual and light-cured cements. The changes in self-adhesive cement do not depend on restoration thickness.

Influence of Different Types of Resin Luting Agents on Color Stability of Ceramic Laminate Veneers Subjected to Accelerated Artificial Aging

Abstract The aim of this study was to evaluate the influence of accelerated aging (AAA) on the color stability of resin cements for bonding ceramic laminate veneers of different thicknesses. The occlusal surfaces of 80 healthy human molars were flattened. Ceramic laminate veneers (IPS e-max Ceram) of two thicknesses (0.5 and 1.0 mm) were bonded with three types of luting agents: light-cured, conventional dual and self-adhesive dual cement. Teeth without restorations and cement samples (0.5 mm) were used as control. After initial color evaluations, the samples were subjected to AAA for 580 h. After this, new color readouts were made, and the color stability (ΔE) and luminosity (ΔL) data were analyzed. The greatest color changes (p<0.05) occurred when 0.5 mm veneers were fixed with light-cured cement and the lowest when 1.0 mm veneers were fixed with conventional dual cement. There was no influence of the restoration thickness when the self-adhesive dual cement was used. When veneers were compared with the control groups, it was verified that the cement samples presented the greatest alterations (p<0.05) in comparison with both substrates and restored teeth. Therefore, it was concluded that the thickness of the restoration influences color and luminosity changes for conventional dual and light-cured cements. The changes in self-adhesive cement do not depend on restoration thickness.

Resumo O objetivo deste estudo foi avaliar a influência do envelhecimento artificial acelerado (EAA) sobre a estabilidade de cor de cimentos resinosos para fixação de laminados cerâmicos em diferentes espessuras. Oitenta molares humanos hígidos tiveram as faces oclusais planificadas. Laminados cerâmicos (IPS e-max Ceram, Ivoclar Vivadent) em duas espessuras (0,5 e 1,0mm) foram fixados com 3 tipos de cimentos: Fotoativado (Variolink II, Ivoclar/Vivadent), Dual convencional (Variolink II + catalisador, Ivoclar/Vivadent) ou Dual auto-adesivo (Rely-X Unicem, 3M ESPE). Dentes sem restaurações e amostras de cimentos (0,5mm) foram utilizados como controle. Após as leituras de cor iniciais (Vita EasyShade, VITA), as amostras foram submetidas a EAA por 580 horas. Em seguida, novas leituras de cor foram realizadas e os dados de estabilidade de cor (ΔE) e luminosidade (ΔL) foram analisados (ANOVA, dois fatores e Bonferroni, p<0,05). As maiores alterações de cor (p<0,05) ocorreram quando as restaurações de 0,5 mm foram fixadas com cimento fotoativado, e as menores quando restaurações de 1.0mm foram fixadas com cimento dual convencional. Não houve influência (p>0,05) da espessura da restauração quando utilizado o cimento dual autoadesivo. Quando as restaurações foram comparadas aos grupos controle (ANOVA um fator e Tukey, p<0.05), verificou-se que as amostras de cimento apresentaram as maiores alterações (p<0,05) em relação ao substrato e aos dentes restaurados. Conclui-se que a espessura da restauração influencia na alteração de cor e na luminosidade do cimento dual convencional e fotoativado. As alterações do cimento autoadesivo não dependem da espessura da restauração.

Color stability of experimental composites containing different photoinitiators.

OBJECTIVES: To evaluate the color stability (ΔE) of experimental composites containing different photoinitiators when submitted to accelerated artificial ageing (AAA). MATERIAL AND METHODS: Thirty test specimens were made in a Teflon matrix (8mm×2mm), using an experimental composite (n=10) with the same monomer composition and particle size, but varying photoinitiator used: Group CQ (0.4% Camphorquinone), Group PPD (0.4% 1-Phenyl-1,2 Propanodione) and Group CQ+PPD (0.2% CQ+0.2% PPD). The samples were light activated (QTH - Ultralux - Dabi Atlante - 40s) and polished before performing the initial color readouts (EasyShade - Vita). Next, they were submitted to AAA for 300h, after which final color readouts were made. RESULTS: The results (1-way ANOVA - Tukey - p<0.05) demonstrated that all the groups presented color alteration above the clinically acceptable level (ΔE≥3.3), however, with no statistically significant difference among them (p>0.05). Analysis of Δb demonstrated increase in the values of this coordinate, indicating yellowing in all groups. CONCLUSIONS: It was concluded that the type of photoinitiator, which presented a tendency towards yellowing, did not interfere in the color stability of composites submitted to AAA. CLINICAL SIGNIFICANCE: Alternative photoinitiators have been extensively studied since Camphorquinone presents a yellowish color, which compromises the aesthetic performance of composites, especially the lighter-shade ones.